I
can’t access any data from my Kingston
4GB SD card since it can’t be recognized by my computer. I was taking some
photos with this SD card inserted into a Cannon digital camera, but suddenly it
became inaccessible on my camera. Then I inserted the card to a card reader to
connect it to my computer, but my computer doesn’t recognize the card either.
What is wrong with this memory card? How can I recover data from this SD card?
Download the Following Software to Recover Data
#1 Data Recovery
Software to restore data off usb drive, memory card, pen drive, hard disk, external drive etc.
|
| |
#2 Data Recovery Software
Another chance for you to recover data from disk, card, external etc.
How to use: Windows data recovery steps | ||
#3 Data Recovery for Card USB - recover data from card/usb
How to use: memory card recovery tutorials |
Why Can’t the Computer Recognize the SD Card?
Firstly, you should be clear the reason why
computer can’t recognize your SD card. Then you may find it is very easy to
solve the problem. Sometimes, SD card can’t be recognized by computer may due
to the card reader. If you don’t use a right card reader or the card reader is
damaged, it will cause SD card not recognized by computer. At such a time, you
only need to change another card reader. Besides, if the chip of the SD card is dirty
due to dust or other reasons, it will also cause the SD card not recognized
both on computer and digital camera. Then you should clean the card to make it
work. However, if it is some other reasons like virus attack, power outage, etc
that cause the SD card is not recognized by computer, the problem may be a
little complicated and you need to take more effort to get back data from the
card and fix the problem.
Solution: Possible Way to Fix SD Card Not Recognized
Problem with Data Back
Here you must be clear that fix SD card not
recognized problem is not equal to recovering data from SD memory card. So you must do these two things
respectively and you must recover data first. If you fix the SD card first, you
may lose the opportunity to get back data inside. The solution to recover data from not recognized card is to rely on third-party SD card recovery software. You don’t need to worry that computer
doesn’t recognize your SD card because this software can deep scan every drive
on your computer no matter it can be recognized or not recognized. You only
need to connect the SD card to your computer, and the software will scan and
locate all files inside the card and then help your recover them.
How to Solve the Problem If You Want to Troubleshoot
Card Not Recognized Problem with Data Back?
The SD card recovery software is completely
free. Firstly, you should connect your SD card to the computer. You had better
connect the SD card to your computer through a card reader. Then free download
the software and install it on your computer. Now, you can begin to recover
data from your SD card with the following instructions,
Step1. Run the software and you will see it main screen with different recovery modules. Choose a recovery module.
Step2. Choose all drives and the software will start scanning every sector of those drives to find the lost data.
Step3. After scan, you can choose the found partitions and preview the found files.
Step4. Select all files and recover them. You can save those recoverable files to your computer hard drive or any other storage media.
Step1. Run the software and you will see it main screen with different recovery modules. Choose a recovery module.
Step2. Choose all drives and the software will start scanning every sector of those drives to find the lost data.
Step3. After scan, you can choose the found partitions and preview the found files.
Step4. Select all files and recover them. You can save those recoverable files to your computer hard drive or any other storage media.
References
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.