The computer D: and F: partitions (F: partition is a removable drive when I connected my USB drive to the computer) whose file systems are respectively in NTFS and FAT are in RAW file system after I did a system repair on my computer which runs under Vista system. Does anybody have any idea to help me fix this problem? I have stored important data inside the two RAW partitions. Any helpful idea will be appreciated.
Solution: There may be something wrong with the partitions when it is in RAW
file system. You can use CHKDSK to check the partitions and format the RAW
partitions to make them usable again.
No help with this method? Then you can
refer to this article Recover
Files and Repair RAW File System with Ease. Here you can get detailed
information to fix the RAW file system with simple steps.
Download the Following Software to Recover Data
 |
#1 Data Recovery
Software to restore data off usb drive, memory card, pen drive, hard disk, external drive etc.
|
|
 |
#2 Data Recovery Software
Another chance for you to recover data from disk, card, external etc.
How to use: Windows data recovery steps | |
 |
#3 Data Recovery for Card USB - recover data from card/usb
How to use: memory card recovery tutorials |
The solution above can only help you repair
the RAW file system on both partitions. However, if you still want to recover
important data form RAW partitions and USB drive, you must rely on reliable RAW recovery software. There
is no doubt that you will lose all data after formatting the RAW partitions, so
you had better recover data first before repairing the RAW problem. Get the RAW
recovery software free from the link above, it is available for recovering any
data when other similar data recovery software leads to no result.
Data Recovery from Partition or USB Drive That Has RAW File Systems
RAW recovery software is a free RAW
partition recovery tool that can be used only after installing it to your
computer. Therefore, you must download and install this software to your
computer before you can use it. Then you can get back data from RAW partitions
with three simple steps.
Step1. Go to the right recovery module on the main Window of the RAW Recovery Wizard to start the data recovery.
Step2. Select the partition you want to recover to start the scanning.
Step1. Go to the right recovery module on the main Window of the RAW Recovery Wizard to start the data recovery.
Step2. Select the partition you want to recover to start the scanning.
Step3. You can see a partition list after
scanning, choose those partitions and preview the found files inside. Mark all
files you would like to recover and save them to another partition.
Refer to: Data Recovery from RAW Drive
Refer to: Data Recovery from RAW Drive
Error Message for RAW File System
1.) The disk in drive F is not formatted.
Do you want to format it now? / You need to format the disk in drive F before
you can use it. Do you want to format it?
2.) There is no disk in drive. Please insert a disk into drive F
3.) The Disk Management Window shows the partition as either RAW or without a file system type
4.) Properties of the partition show that both used space and free space are 0 byte for the raw drive
2.) There is no disk in drive. Please insert a disk into drive F
3.) The Disk Management Window shows the partition as either RAW or without a file system type
4.) Properties of the partition show that both used space and free space are 0 byte for the raw drive
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.